Plumber in SeaTac, WA
Need a plumber in SeaTac? Call (833) 710-2588. We fix leaks, drains, water heaters, and sewer lines across SeaTac, from Angle Lake to the north end near Burien, 24/7.
- Open 24/7Phone answered day and night
- Free quotePrice range on the call
- Firm priceIn writing before work starts
- 6 local areasBurien and nearby towns
Your local plumber
Who is the best plumber to hire in SeaTac?
Call a local plumber who knows SeaTac's mix of older ramblers, newer townhomes, and apartment buildings. Burien Plumbers works right next door. We serve single-family homes, condos, and rentals across SeaTac and can usually give you an arrival window on the first call.
SeaTac is a city of about 31,000 people wrapped around Seattle-Tacoma International Airport. Homes range from 1950s and 1960s single-story ramblers on the residential streets east and west of International Boulevard to newer townhomes and apartments near Angle Lake Station. Each type has its own plumbing habits, and we plan for them before we arrive.
Good to know
What plumbing repair services can you book in SeaTac?
We offer every core plumbing service in SeaTac: emergency repairs, drain cleaning, water heater repair and replacement, leak detection, sewer line repair, and pipe repair or repiping. Each service page lists prices and warning signs so you know what to expect.
- Emergency plumber in SeaTac for burst pipes, floods, and backups
- Drain cleaning for kitchen, bath, and main lines
- Water heater repair and replacement, tank and tankless
- Leak detection for high bills and hidden leaks
- Sewer line repair, including camera inspection
- Pipe repair and repiping for older homes
Pro tip
Condo owners: check your HOA rules before you call. They often say who pays for shared drain stacks and main lines.
Good to know
What plumbing repairs do SeaTac homes need most?
SeaTac's most common plumbing problems are aging galvanized water lines in mid-century homes, root-clogged side sewers, worn-out water heaters, and shared drain stack clogs in apartments and condos. Wet winters also strain yard drains and sump pumps in low spots.
Mid-century ramblers
Many SeaTac houses date from the 1950s and 1960s. If the plumbing has not been updated, the supply lines may be galvanized steel. That pipe rusts inside, so pressure drops and leaks start at threaded joints. The side sewer is often clay pipe, which lets roots in at the joints.
Townhomes and newer builds
Newer homes near Angle Lake and along the light rail line mostly use PEX supply lines. Problems there tend to be fixture and valve failures, water heater issues, and clogs from construction debris in the first few years.
Apartments and condos
In multi-unit buildings, one clog in a shared stack can back up into several units. Grease from kitchens is the top cause. Water heaters in these buildings also work hard and wear out faster.
Airport-area remodels
Some homes near the airport have had noise insulation work, which often included new windows and doors. That work generally does not touch the plumbing, so the original pipes may still be in place even in homes that look updated.
Pricing
How much does a plumber cost in SeaTac?
SeaTac plumbing prices match the rest of the Burien area. Most repairs cost $150 to $650. A new tank water heater runs about $1,900 to $3,800 installed. Sewer and repiping jobs are the largest, from a few thousand dollars up. After-hours calls add a fee.
| SeaTac job | Typical cost |
|---|---|
| Clogged drain | $150 – $350 |
| Main line clog | $250 – $600 |
| Water heater repair | $150 – $650 |
| Tank water heater replacement | $1,900 – $3,800 |
| Leak detection | $200 – $600 |
| Galvanized section replacement | $400 – $1,500 |
For condos, ask your HOA what it covers before you call. Shared stacks and main lines are often the association's job. Fixtures and lines inside your unit are usually yours.
Warning
In apartments, a backup in your sink may come from a shared stack. Tell your manager right away so other units stop draining into it.
Good to know
Where can you get same-day plumbing service in SeaTac?
We cover SeaTac ZIP codes 98188, 98198, and 98158, plus the parts of 98168 near the north end of the city. That includes neighborhoods around Angle Lake, McMicken Heights, Riverton Heights, and Bow Lake, as well as streets along International Boulevard and Military Road.
From SeaTac we also serve the neighboring areas on our list. Boulevard Park sits just to the north, and Normandy Park lies to the west across Des Moines Memorial Drive. Burien itself is a short drive up SR 509. If you are close to Des Moines or Tukwila, call with your address and we will confirm coverage.
Good to know
What should you tell a SeaTac plumber when you call?
Tell us your address, whether you own or rent, the type of home, and what is happening. If you are in a condo or apartment, tell us if other units are affected. That helps us know whether the problem is in your unit or a shared line, and who needs to approve the work.
- Your address and nearest cross street
- House, townhome, condo, or apartment
- What you see and when it started
- Whether water is leaking now
- Age of the water heater, if that is the problem
- Who approves the work: owner, landlord, or HOA
Ready to book? Call (833) 710-2588 and we will give you a price range and arrival window.
Good to know
Who pays for plumbing repairs in SeaTac rentals and condos?
Renters should report leaks and clogs to the landlord right away, in writing. Landlords can call us directly and approve the quote by phone. Washington law requires landlords to keep plumbing in good working order, and fast reports help limit damage to the unit and the building.
If you are a renter facing an active leak at night and cannot reach your landlord, shut off the water to the fixture or unit if you can. Then keep trying to reach the owner. We can talk you through shutoff steps over the phone even if the owner will be the one booking the repair. Landlords with several SeaTac units can set up a single contact for approvals and invoices.
FAQ
Frequently asked questions
Short, direct answers to the questions we hear most on the phone. Do not see yours? Call and ask.
Ask a Plumber NowDo you offer emergency plumbing in SeaTac?
Yes. We answer 24 hours a day and send plumbers to SeaTac for burst pipes, sewer backups, and water heater leaks. After-hours fees apply and are quoted on the phone.
Can you work on my SeaTac condo?
Yes. We work inside condo units and can coordinate with your HOA or property manager when a shared line is involved.
My SeaTac home has low water pressure. Why?
In 1950s and 1960s homes, the usual cause is galvanized pipe rusting inside. A failing pressure regulator or a partly closed valve can also cause it. We test to find out.
Do landlords in SeaTac use your service?
Yes. We work with landlords and property managers. Tell us who should get the quote and invoice when you call.
Do I need a permit for plumbing in SeaTac?
Water heater replacement, sewer repairs, and repiping usually need a permit from the City of SeaTac. We include permit costs in your quote.
Call now
Ready to get your plumbing fixed?
A person answers 24/7, gives you a price range, and books the next open time.
(833) 710-2588